A modern workbench system
Project #2109 • Skill Level: Beginner • Time: 1 Week • Cost: $400
Most workbenches come with a little history. This history is personal. My very first woodworking project was Tom Casper’s clever and simple, “Workbench in a Weekend” workbench article in the long-gone and revered Woodwork Magazine. It’s a great bench. It got me excited about woodworking. Later while editor at American Woodworker, Tom updated it and designed a clever box beam MDF workbench.
Several years later – over a few beers of course, Tom challenged me to create my own plywood workbench. Being a designer who likes a good challenge, I said I’d think about it. And, so I did. For several years, in fact. The result is a new kind of workbench designed for modern woodworkers and makers. The Maker Workstation. A modern workbench system.
What is a Maker Workstation?
What makes the maker workstation different than conventional workbenches is the various ways it can be modified and the different ways it holds workpieces. Its key feature is that it’s adaptable to different needs and is customizable. It’s a system that uses workstation “furniture” to position and hold work, customizable top and side plates, modules, fixtures, hardware, tool holding capability and accessories.
Unlike traditional workbenches, the Maker Workstation is made out of plywood with a MDF top. Instead of hardwoods and classic joinery, it takes advantage of the stability and strength of Baltic Birch plywood, stack lamination, torsion box and I-beam construction, and the flatness and surface hardness of MDF. Instead of joinery, it’s assembled with a handful of Festool Domino joints, glue, screws, and a lot of T-nuts.
The top is a complete structural unit that performs like a heavy-duty torsion box. It’s heavy, flat and stiff. The middle and bottom layers are 3/4“ plywood separated by five-layer-thick, glue laminated risers. The replaceable work surface attaches to the middle layer with screws and T-nuts. The laminated plywood base utilizes the strength of the top unit, has no long stretchers, is stiff and stable and is completely open in the middle.
What can the Workstation do?
The maker workstation handles traditional woodworking tasks and adds new capabilities for modern power tool woodworkers. By combining a grid of dog holes and workstation furniture the user can hold a work piece of any shape and position it where it’s most comfortable to work with. With modules, plates, and tool sets it can adapt any woodworker or maker task or project.
The bench is versatile and adaptable, for assembly, workholding in all places and keeping yourself organized.
Traditional vs New Workbenches
Refined over centuries, traditional workbenches are a superb platform for hand tool woodworking tasks. They really work. I’ve used them for decades and built several. With heavy hardwood construction and a flat top, they handle the physics of chopping, cutting, and planning. Parts are held with vises, stops, holdfasts and clamps. As good as they are for working with hand tools, there are a few shortcomings when working with other tools. Work height, part positioning and holding and adaptability to task are top of the list.
What’s Different About the Maker Workstation?
For improved power tool control and closer observation without bending over, the maker workstation is about 2“ taller than a traditional workbench. Unlike a classic bench where parts are held down to the top with holdfasts and clamps, the workstation uses dedicated furniture, hold downs and accessories to control parts both laterally and vertically.
A major design goal is the ability to position and secure any size or shape work piece for using modern power tools like Festool’s Domino joiner, track saws and tasks like carving or project assembly. “Position” is key here. Because the workstation grid requires CNC accuracy to build, that accuracy is available to the user as a tool.
All components are designed around a precision grid system. A grid system is a system of lines and intersections based on a set of standard dimensions designed to enhance a task. If the work surface and components are all accurate to the grid, they can interact. In the case of the maker workstation, the dogs, hold downs, furniture and plates can quickly be moved around to position and secure workpieces for various tasks.
Primary grid lines are spaced 4“ with 3/4“ dog holes. Sub-grids sit underneath. (NOTE: A 96mm/20mm metric version of the maker workstation will be available soon.) Combining known spacing, measurement and reliable 90° angles let the user position and square a workpiece anywhere on the bench for work and project assembly. From a designer’s perspective, a grid-based system opens up a lot of exciting possibilities. Yes, there’s a lot more to come.
Maker Workstation Online Articles
Among the challenges when writing an article like this are fitting a lot of information into a limited space. Being a new kind of workbench, significant print space needs to be dedicated to introducing the design and features of the workstation. New techniques, tools and methods, and a step-by-step building process also require a lot of room. With those limitations in mind, this initial article (same as it appears in the June 20201 issue of Popular Woodworking) is focused first on introducing the Maker Workstation. The article is supported with companion online articles that aren’t space limited and videos to help Popular Woodworking readers build a maker workstation. Included with the online series are DXF files for making workstation and side bench templates, suggestions for getting templates made, and PDF drawings of the workstation (see bottom of article.)
Upcoming companion articles:
• A Video Introduction to the Maker Workstation
• A Step-by-Step Guide to Building the Maker Workstation Top
• Building the Maker Workstation Base
• Maker Workstation Furniture, Components and Vise Module
• Using Large, Small and the Shaper Origin CNCs to Make the Maker Workstation
Workstation System Components
Most maker workstation furniture is 2“ wide and dog holes are spaced 4“ apart. This allows users to position and square workpieces in convenient and comfortable locations. Work can be secured with wedges, dog clamps or threaded hold downs.
Top Plate System
Rather than a sea of holes interrupting the work surface, add-on top plates give users flexibility. A high density or custom arrangement of dog holes and hold downs can be added by mounting a top plate as needed. The plates register to the work station via dogs and can be attached via hold downs. The 72“ workstation is designed for three 23“ top plates. A great use of top plates is to add extra holding versatility as needed. Added dog hole density gives the user flexibility to hold smaller or odd-shaped work pieces. Custom arrangements, specialty fixtures and hold downs allow the maker station to adapt to the task.
The top plate is one of the most versatile accessories for clamp objects of any shape. A bonus is that the clamping surface is completely removable without having to unclamp the workpiece.
Side Plate System
Side plates are 3 1/2“ x 16“ and mounted via 14 side plate mounts along the sides of the workstation. Side plates can be specialized and make it easy to add tool holders or modules to the workstation.
The workstation uses commonly available round bench dogs and dog accessories that are typically 0.74“ in diameter for 3/4“ dog holes. I purchased several different kinds. The orange ones came with the Worx sidekick and the dark gray dogs have tabs on the end and cushioned tops. The black dogs are slightly smaller at 0.72“ for a looser fit. Every dog has its place. I recommend workstation builders acquire a couple of types and build a starter set of eight or more plastic dogs before beginning construction.
Not finding bench dog designs I liked, I created several new designs for specific workstation tasks. I 3D printed and tested dozens for the maker workstation. Though the dogs may be plastic, they’re tougher than they look. I have yet to break one. All the 3D models I created for the maker workstation are free and shared at www.thingiverse.com.
I print dogs in different colors to indicate function at a glance. Black and gray dogs are standard shapes and mostly used for workstation furniture registration and holding. Red dogs have different face shapes are used for bench stops. Dogs with ridged handles for grip are tight fitting for registering templates and layers during workstation construction. Indented dots, like those used on dice are imbedded into dog tops to indicate dog length so when stored on the workstation legs, I can grab the ones I need. One dot is one plywood layer high, two dots, two layers high, etc.
3D printers are great design tools and handy for creating jig parts, tool holders and other useful things around the workshop. I created a number of 3D printed parts for cam clamps, vise handles, prototypes of a hand rest that improves the Rockler Portable Drill Guide, soft plastic cushions to make the adjustable feet stickier and spacer sets for the upcoming workstation Festool track saw module that integrates the tool with the maker workstation.
Building the Maker Workstation
The maker workstation is designed to be built by experienced beginners to advanced woodworkers as long as they’re comfortable with basic woodworking tools and tasks. Being primarily made of plywood, it costs around $300 or so to build.
Though plywood construction might imply casual, building the workstation demands a commitment to working at a high level of precision, CNC level precision. Since many woodworkers don’t yet have access to digital woodworking tools, I designed this project to be made with CNC-made templates and power tools. DXF template files and PDF drawings are available with the companion online articles. With that in mind, I’ll take you on a tour of how the templates work and a new woodworking tool I used to build the maker workstation.
First, I Built a Bench to Build a Bench On
Among the challenges building my first workbench were two classic woodworkers chicken and egg questions: How do you build a workbench without a workbench to build it on? How do you build it without a shop full of tools? I struggled with a rickety Workmate and too much time working on the floor using just an old Skillsaw and a drill for tools. It was a great bench but not fun to build. So, in honor of this being the 25th year since that first bench, I approached this project in much the same way—as a new woodworker without a bench to build on and minimal tools. This time I put together a modern toolset and used a Festool Tracksaw, a Rockler Portable Drill Guide, a router, and cordless drill.
First, I built three small workbenches to build the 72“ workstation on. The Maker Side Bench is a smaller, simplified version of the Maker Workstation—same concept and construction with less parts, make it a great warm up for the main event. Plus, when you’re done, you have same height side benches that expand the physical boundary of the maker workstation.
I started off by using the excellent, 32″ tall Worx Sidekick portable work table as a foundation. Using a template, I built what I refer to as a “stack” that mounts onto the Sidekick, that turn it into a portable woodworking workbench with many of the features of the full-sized maker workstation.
Precision is Key to Maker Workstation
For the workstation grid system to work, every component has to be precise. Precision templates are the critical ingredient to making the workstation. Armed with a CNC-made template and a new tool, the Rockler Portable Drill guide, you can come close to CNC accuracy. The templates use dogs for registration to step along the 72“ workstation layers.
The workbench system will continue to grow and evolve. The maker workstation is just the first in a series of planned maker work surfaces.
Modules that integrate the Festool Track Saw into the workstation system, marker panels for the Shaper Origin CNC, a machinist vise module, a router table module, bench cookie plates, plates for metalworking and more are planned for the near future. New accessories and modules will be announced in the online companion articles.
- Other articles about the Maker Workstation at Popular Woodworking.
- Free Maker Workstation Classic Base drawing in PDF format
- Free Maker Workstation Modern Base drawing in PDF format
- Maker Workstation 72″x 24″ Layer Guide
- Maker Workstation Vise Module Drawing
- Maker Workstation 48″x 24″, 48″x 48″, and other Layer Guides sizes will be available beginning 6/1/21
- Plywood cutting layouts for 72″x 24″ workstation
- Baltic Birch Maker Workstation CNC machined templates available for ordering online at woodworking.digital.
- Free DXF Template Files to make your own templates for using a drill guide for dog holes
- Free DXF Offset Template Files to make your own templates for using a router for dog holes
- Digital Woodworking on Instagram
- Digital Woodworking YouTube Channel
- Author’s website at woodworking.digital
- Personal Work on Instagram
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.