In Finishing

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

Wiping varnish is simply any brand of oil-based alkyd (regular) varnish or oil-based polyurethane varnish in any sheen (gloss or satin) thinned about half with mineral spirits (paint thinner).

Rules for Application
■  Wipe or brush on the wood and
■  Wipe off all the excess; or
■  Brush off some or most of the excess using a “dry” brush; or
■  Leave all the excess (only on flat, horizontal surfaces).
■  Allow to dry overnight or at least 6 hours in a warm room, garage or shop.
■  Sand each dried coat lightly with #320- or #400-grit sandpaper to remove dust nibs before applying the next coat.
■  Three or four coats are usually minimum for good results.

When to Use
On any object – furniture, trim, cabinets – or even floors when you want a protective and durable finish that is easy to apply and produces almost perfect results.

Can be used over any stain or finish, as long as it is dry, clean and dull. Also, any finish can be applied over wiping varnish as long as it is dry, clean and dull. If you spray lacquer, however, spray light coats because the lacquer thinner could cause the varnish to blister.

■  Very easy to apply.
■  Very protective and durable after several coats.
■  Easy to get an almost flawless result.
■  Adds warmth to dark and dark-stained woods.

■  Takes many more coats to achieve the same thickness and protection as fewer coats of brushed-on alkyd or polyurethane varnish.
■  Adds a noticeable yellow/orange coloring to light-colored woods.
■  Can result in streaking when using a satin wiping varnish.

Common Application Problems
■  Dust nibs, especially if the finish room is dusty.
■  Runs on vertical surfaces if most of the excess isn’t wiped or brushed off.

Make your Own
■  One part gloss, oil-based polyurethane varnish; one part mineral spirits (paint thinner).

■  Higher percentage of polyurethane varnish to achieve a faster build.
■  Higher percentage of mineral spirits to achieve a longer working time and better leveling.
■  Substitute any other oil-based varnish.

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts
  • RHS

    What does adding linseed oil do as far as a wiping varnish? I’ve seen that used in other formulas, but don’t know what it adds to the finished piece.

Leave a Comment

Start typing and press Enter to search