In Projects, Shop Blog, Techniques

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.


Now let’s mill the edges of the top shelves. I install a 3/8’’ roundover bit in the router table.



As usual, I proceed with test cuts. If you look closely on the photo you will see that I must readjust the height of the router bit to get rid of this disgracious line on the top.



I make visual tests to establish the width and the length of the upper shelves. According to this photo, the top shelf would be too proud from the moldings. This is a matter of taste. Then, I proceed to make the cut.



Here’s a result that pleases me.



Another sanding session, from 100-grit paper to 500-grit. And yes, I’m wearing my dust mask!



To sand the egges, I install the shelves in the bench vise. Doing so, I can sand the three required sides.



To see the details and photos of all the steps from the begining, click here.






Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts

Start typing and press Enter to search