I use lots of Phillips-head sheetrock screws, which are made of hardened steel. They’re tough on bits. A worn-out bit can’t be re-sharpened, so I reshape it to fit a slotted screw [...]
A toilet bowl floor gasket is an excellent lubricant for screws–much better than paraffin, soap, or all of the other materials I’ve tried. It’s very soft, so all you have to do to [...]
To sand a lot of molding, glue 80-grit sandpaper to several inches of the molding. Rub a block of Styrofoam on the sandpaper until the block conforms to the molding’s contour. Glue [...]
Spring clamps are easily converted to miter clamps by adding swivel jaws. Remove the vinyl tips, and then hacksaw a 1/2″ long slot down the center of the metal jaws. Use needle-nose [...]
This light-duty clamp is ideal for small parts-and easy to make by the dozen. All you need are a couple wood scraps, a rubber band, and a short piece of dowel rod. You can vary the pressure by [...]
Here’s a simple way to protect your chisels from getting nicked and rusty rattling around in your toolbox. Just cut the fingers off some old leather work gloves. Poke holes with an awl at [...]
Bessey K-Blocks are great for holding K-clamps in position for glue-ups, but they’re also quite handy for other things. I milled hardwood strips the same dimensions as my K-clamps and use [...]
Disc Break Back when I bought my radial arm saw, onboard braking systems didn’t exist. But I’m a gadget freak, so I bought an electronic brake and mounted it on top of the saw. The [...]
Here’s a dirt-simple but effective accessory for your miter saw. It eliminates tear-out, allows you to make precision cuts by aligning a pencil mark with the kerf, and provides room to screw or [...]
They’re so easy and fun to make that you’ll want a dozen! If you can’t stand to throw away good wood, you’ve probably got a stack of short boards that are just waiting to [...]
Work miracles on wood with oxalic acid. Watering a potted plant can be disastrous if the plant lives on top of something made out of wood. We’ve all seen the white spots and black rings that can [...]
Editor’s note: This article originally appeared in the October/November 2009 issue of American Woodworker The impetus for building my shop was to satisfy a passion that my late brother Glen [...]