Archives

It can save you lots of money—and grief! Are you a scrounger? Always looking for a deal? Self-reliant? Those words fit a lot of woodworkers, particularly those who search for unusual or [...]

Finding a felt-tip marker or touch-up stick that actually matches the color of your project is a real crapshoot. What if you could make your own, using your own stain? You can, using the Perfect [...]

Here’s a simple way to sharpen chisels using a 3″ sanding drum mounted in an oscillating spindle sander or a drill press. Cut a squared-up 2×4 the length of the sander’s table. Cut a [...]

My lathe came with a lamp, but the lathe’s manual has this weird warning: “Position the work lamp so that wood chips do not accumulate inside the lamp shade and pose a fire hazard.” Now, [...]

For small cabinets, I prefer to use small, discreet shelf pins that I make myself. I also make sleeves for the pins to fit into. Sleeves help hold the pins firmly in place. I make the pins from [...]

Shellac is a mainstay in my shop, both as a sealer and as a finish. I mix my shellac from flakes and usually go with a 1 lb. cut, which is ideal for brushing ultra-smooth coats. I used to measure [...]

How to choose, condition, and clean a finishing brush. It’s really tempting to buy an inexpensive brush for finishing. Say you spend $4 on a standard paint brush and throw it away rather than [...]

Bench grips are handy for holding parts above the bench for routing, sanding or finishing.  To make them, just cut some wood and rubber shelf liner into 2″ to 3″ squares. Glue the [...]

A coping sled is a must-have accessory for router table work. It helps you hold a narrow piece, such as a door rail, perpendicular to the fence and backs up the cut to prevent blowout. At least, [...]

I’ve dried my own lumber for years, but I always had a problem getting enough weight on top of the stack, to keep the upper boards from warping. Here’s a solution: Use clamps made from threaded [...]

In a search for wide boards, it pays to buy whole logs. Visitors to my shop often ask where I buy the wide, matched cherry and walnut boards I use for reproducing classic American furniture. [...]

Blowin’ in the Wind My wife and I ran out of plywood as we were adding shelves to the garage, so we headed to the home center for another sheet. We hadn’t noticed how windy it was until we came [...]