Archives

Difficult glue-ups are troublesome enough without having to position clamp pads as part of the process. I’ve tried using hot-melt glue, double-sided tape and various other methods to hold pads [...]

While I was gluing up the pedestals for an oak desk, I realized I needed a way to hold the sides parallel at the front. Three Quick-Grip clamps and a scrap wood spacer did the trick. They [...]

This small rack rolls easily to anywhere you need it. There is an old saying in woodworking that you can’t have too many clamps. While this is true, it is entirely possible to have too many [...]

An F-style clamp works well for getting into tight spaces, but how do you turn the handle? The answer: Just drill a couple of holes through it and insert a screwdriver. A 90° offset to the holes [...]

To support a large panel while I drilled holes in the edge for dowels, I added a second sliding clamp jaw to a pipe clamp and clamped it to the edge of my workbench. -Steve Keller…

Spring clamps are easily converted to miter clamps by adding swivel jaws. Remove the vinyl tips, and then hacksaw a 1/2″ long slot down the center of the metal jaws. Use needle-nose [...]

Most of the clamps in our woodworking arsenal are designed to produce tons of pressure per square inch. While we use them to hold pieces over the workbench, close joints, or keep glued parts from [...]

A well-equipped shop will have a variety of clamps for different situations. Here’s our favorites. I think that you’ve probably heard the saying that “a woodworker can never have too many [...]

This light-duty clamp is ideal for small parts-and easy to make by the dozen. All you need are a couple wood scraps, a rubber band, and a short piece of dowel rod. You can vary the pressure by [...]

Tool: Sure-Foot F-Style Clamp Shop Now   Manufacturer: Rockler MSRP: $19.99+ There are few tools that couldn’t use an improvement or two—even the humble bar clamp. Rockler thought of a few [...]

While making a base for a wooden vase, I had to glue up a small octagonal shape. I made this simple band clamp from a piece of string and a rubber band. Here’s how it works: first, tie one end …

When working on small projects, I often need to glue odd-shaped mouldings and tiny trim to box sides and other pieces. Not much pressure is required to hold these small pieces in place, and I [...]