It Ain’t Flippin’ Burgers
I’m not afraid of change. If I could paraphrase Michael Douglas in the movie “Wall Street,” “Change is good.” It’s a renewal. I get pumped up as I begin anew. That is one of the [...]
Adjustable Tongue-and-Groove Set
Adjustable Tongue-and-Groove Set Lots of tongue-and-groove router bit sets are designed for 3/4-in. material. They cut 1/4-in. tongues and 1/4-in. grooves. A new bit set from Freud ($70) is [...]
Tablesaw Worktable
Tablesaw Worktable Turn your tablesaw into extra workbench space with a piece of 3⁄4-in.plywood.Attach wood strips around the plywood edges for a snug,no-slide fit on the metal table. [...]
Shop Cleanup
We all have junk in our shops that we don’t use or no longer need. My junk is sometimes a bit unique, but it’s junk none-the-less. I’m cleaning out my shop, making room for more junk and I’ll [...]
Screw this Anarchist’s Tool Chest Stuff
I’ve now built more than a dozen traditional tool chests entirely by hand. Hand-cut dovetails. Hand-cut mouldings. Hand-cut shiplaps and beads. Hand-cut blah blah blah. These chests take me about [...]
Using a Scratch Stock
For the April 2013 issue of Popular Woodworking Magazine, we tested the new Hock Tools scratch stock – you can find that full tool test free online by clicking here. The video below shows you how [...]
Q & A: Board Feet Calculation
Q & A: Board Feet Calculation Q: I used to buy planed and jointed lumber (S4S) at a home center where it was sold by the lineal foot.Now that I have a planer and jointer, I want to buy [...]
‘City Sideboard’ & Getting Square
The April 2013 cover project is a “City Sideboard” built by Mario Rodriguez of the Philadelphia Furniture Workshop. The sideboard, which is sized for smaller, contemporary spaces, is [...]
A Cool Cat of a Blacksmith
I’m putting the finishing exterior touches on my “Anarchist’s Tool Chest,” though I’m still deciding whether or not to add a lock. But I knew I wanted chest lifts (also [...]
cheap table part three
Somehow, I don't like this set up used for pictures. Where was I? Ok, I guess i will just show the completed project, and the Chair it was supposed to match. Chair was [...]
Cheap Table??
Ok, Daughter wanted a small Dinette Table for the kitchen. I had some old planks down in the Dungeon Shop. Milled up an old Oak 2×8 into four leg blanks.This is what [...]
Where to Put Holes for Holdfasts – One Man’s Opinion
Let me say this first: You are welcome to put a holdfast hole anywhere you please. No one will think less of you. In fact, if you are questioned by your friends as to why you put a certain hole [...]