Archives

To wrap up my new product coverage of AWFS, I’d like to talk about two new takes on technology that’s been around for years. The first is an instant glue that could be a godsend for [...]

The bracket corner straps that I used were made from a short piece of thin brass that was drilled and bent. In order to install all of them, don’t ask me how many, I devised a template. [...]

It’s always fun to attend shows like the recent Association of Woodworking & Furnishings Suppliers event in Las Vegas. Not only do you get a look at new or improved products that are [...]

I’ve had a bit of time in the shop this week, so I went back to work on the storage boxes that sit inside my yet-to-be-built workbench. I know. It’s been almost six months and [...]

Double-Duty Sanding Drum I sand a lot of thin wood on my drum sander and as a result, I only wear out the bottom part of the drums. Flipping them over allows me to use the top but the middle …

This year’s AWFS show is clearly a showcase for innovative design. Today I saw two amazing computerized machines that could be game changers, as well as some clever incremental improvements [...]

In order to install the large-sized handles I had to create a bigger template system that, although shared the same principles with the previous template, had one or two new variants. I made the [...]

When I attended the International Woodworking Fair in Atlanta last year, it was a relatively slow time for new product releases, but manufacturers have made up for that this year at the [...]

Sharpening router plane blades can be no fun. For years now, I’ve made things easier for myself by honing the flat back of the iron through the grits and then removing the “burr” from the bevel [...]

Most woodworkers have an idea of what quartersawn wood is. The accepted definition is that the growth rings are between 60° and 90° to the wide face of the board. In some species, notably white [...]

Spend a day in any large city library and look for woodworking books written in the 1990s or earlier and you will find a treasure trove of 2D drawings just waiting for a SketchUp Woodworker to [...]

it’s very useful to have one very precise square in your shop. You can rely on this square for machinery setup, such as setting your jointer fence and your tablesaw blade square to the table.