Archives

Use this simple, strong method for constructing kitchen cabinets and other built-ins. Editor’s note: Nancy Hiller passed away on August 29th, 2022 after a long battle with cancer. In honor [...]

To mark the exact center of a board, I measure an equal distance from both ends and make two marks. This distance is just an approximation—it doesn’t matter if it’s longer or shorter than exactly [...]

One piece of wood and a lot of bamboo skewers do the trick to make this simple and fun knife block.

Tool: The Original OmniSquare Shop Now   Manufacturer: Omni Tool Works MSRP: $29.95 This clever and inexpensive milled aluminum square functions as a try square, miter square, bevel square, [...]

A few weeks ago, my spouse purchased two Faux bamboo Chippendale mahogany chairs for our dining table. The chairs were a reproduction of a Victorian furniture style and meant to match the [...]

HOUSE OF DUST To keep airborne dust from getting into the house, I bought a dust collector for my basement workshop. I wanted to start with a clean slate, so I decided to rid the shop of a [...]

Here’s a quick way to glue up a mitered frame of any size using only two clamps, with no worry that the frame will shift out of alignment. You’ll need two 1″ x 1″ hardwood bars (make [...]

A throwaway wooden ruler prevents fatal errors when dovetailing. The No. 1 mistake made by first-time dovetailers has nothing to do with sawing or chopping – the obvious choices. Instead, I’ve [...]

Tool: 8240 Cordless Rotary Tool Shop Now   Manufacturer: Dremel MSRP: $99 (includes 2.0Ah battery, charger, storage case, and several accessories) Dremel has been a whirlwind recently, [...]

A gifted teacher preserves and shares the legacy of James Krenov. Editor’s note: This article originally appeared in the June 2017 issue of Popular Woodworking Magazine To reach the Inside [...]

Here’s a quick way to get all the dust out of your machine’s nooks and crannies. Most shop vacuums have one port for vacuuming and a second port for blowing. Hook up a hose to each [...]

Some years back, when the company I worked for relocated out of state, I lost my job. While hunting for a new position and feeling a bit down, I visited a shop that sold used woodworking [...]