We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.
By Robert W. Lang
Page: 30
From the October 2009 issue #178
Buy this issue now
Traditional sharpening of cutting tools involves grinding, getting the tool shaped properly and honing, then refining that shaped edge. There is no shortage of devices for either task, but if you struggle with grinding, the Sorby ProEdge System might be what you’ve been looking for.
Many woodworkers have trouble using a bench grinder, and Sorby’s machine has features that make grinding easier while reducing the risks of damaging tools. The obvious difference is the use of a sanding belt instead of a wheel. The 11 5/16″-wide belt (we wish it were more than 2″) allows you to shape a wide chisel or plane iron without sliding it back and forth across a narrow surface. It also speeds the initial flattening of the backsides of chisels and irons.
From the October 2009 issue #178
Buy this issue now
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
