Archives

I frequently need to clamp wood on edge to saw tenons or work the edge of a plank, but I don’t have a traditional woodworking bench. While studying at the Northwest School of Wooden Boatbuilding, [...]

One of the most accurate approaches for checking a case or other assembly for square is to compare the inside diagonal measurements for equidistance. The easiest way to do this is using pinch [...]

  A bench hook is an indispensable workholding device for crosscutting. The traditional bench hook is made of a base, a stop or rest and a cleat. It is usually used against the apron or [...]

Tool: Magnetic-Mount LED Work Light Shop Now  Manufacturer: Lee Valley MSRP: $36.50 I have a perfectly good light for my workbench, on an attachment that slips into the dog holes. And, [...]

I have to admit that I’m not very fond of dowel joinery. I’ve repaired too many old dowel joints over the years to trust them. Part of the problem is that a dowel hole in face grain offers only [...]

Glue Cleanup in Tight Spots Glue squeeze-out can be difficult to clean up in tight spaces such as beads and grooves because you can’t wipe the area very effectively with a damp rag nor insert a [...]

Trying to bore with a Forstner bit using a hand brace is a nearly impossible task. I’ve come up with a solution that works fast and effortlessly. Drill a pilot hole to whatever depth you desire, [...]

After years of wishing my old workbench had a tail vise, I realized I could make one of my new Jorgensen Cabinet Master bar clamps do the job. All I had to do was reverse the sliding lower jaw [...]

Tool: Benchtop DC Personal Dust Collector Shop Now  Manufacturer: Oneida MSRP: $599 Dust really is the bane of the power tool woodworker. It’s also hazardous, especially if you [...]

Jointing with a Planer I across some wonderful oak boards for a small table I wanted to build. The problem was the boards were too wide for my jointer, and I didn’t want to rip them any narrower. [...]

Having light precisely where you need it at the bench makes it easier to see what you’re doing, especially for jobs such as laying out joinery, cutting dovetails and other detail work. This [...]

I make a lot of shelving from hardwood plywood, covering the panel edges with 1⁄4“-thick solid-wood edging. The edging, which is oversized in length and width, is trimmed flush with the [...]