In Shop Blog

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

AS YOU CAN SEE A PIECE OF TIMBER I TURNED ON LATHE.I THEN HOLLOWED IT OUT.THICKNESS IS 1.76 MM.USED A DREMEL ENGRAVER WITH A 1.5 MM DRILL BIT. AND MADE THIS.ALL HOLES ARE DRILLED AT RAMDOM  TILL I GOT TO THE PRECISION PARTS WHERE EACH HOLE IS ABOUT 0.65 APART.  THIS TOOK ABOUT 2/3 HOURS.IN MY OWN TIME.THIS WILL BE DANISH OILED. ITS ALSO FRAGILE. SEE NEXT BLOG WITH THIS UP AGAINST A LIGHT. THIS WAS DONE SITTING WATCHING TV ON A LAP TRAY. JUST EXPERIMENTING.!!


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts

Start typing and press Enter to search