We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.
|
|
CMT's slot cutter set, $160, provides a complete slot cutting package. With four arbors, seven cutters, seven bearings, and a handful of shims, this set can create slots with different depths and widths, tongue and groove joints, lock rabbets, and more. The four arbors allow you to stack the cutters in a variety of configurations. Mount a single cutter and bearing for conventional slot cutting or, using the longer arbor, stack up a number of cutters for making a very wide slot. Using a countersunk bolt the cutters can be mounted at the end of the arbor to allow undercutting, as you would with a lock rabbet joint. The cutter set includes one 1/16-in., one 1/8-in., one 5/32-in., one 3/16-in., and three 1/4-in. cutters. The four bearings range in size from 3/4-in. to 1-1/4-in diameter and can be used to create slots from 5/16-in. to 9/16-in. deep.
Source
CMT USA, (888) 268-2487, www.cmtusa.com, Slot Cutter Set, #823001, $160
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
