We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.
My workbench is beautiful and I want to keep it that way, so I cover the top with builder's paper ($7/140-ft. roll at my local home center) whenever I'm gluing or staining. But the heavy roll was hard to handle and a nuisance to store until I devised this simple holder made from 4-in. PVC drain pipe (10-ft. length, $3).
The holder is no wider than the roll, so there aren't any protruding hangers or rods.Using my chop saw, I cut the PVC pipe and the roll of paper to the width of my workbench. Then, on my tablesaw, using the fence, and with the blade set just high enough to cut through the pipe, I carefully cut a lengthwise slot.
I screwed the pipe to the end of my bench, using the drain holes for access. Then I slid in the roll of paper. It was a tight fit at first, because the new roll was the same diameter as the pipe, but once I'd covered the bench a couple times, the paper pulled out easily.
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
