We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.
|
|
Cabinetmakers use shop-made or commercial drilling jigs to speed the mounting of Euro hinges on their doors. What sets the EZ-Mount apart from basic drilling jigs is that it also holds the hinge in place, allowing you to use the hinge plate itself as a guide. With the EZ-Mount you can drill the pilot holes with one drill and screw the plate to the cabinet with another. The jig comes as a set of two: one jig for inset doors and one for full overlay doors, and are available for Salice and Blum brand hinges.
Source
EZ-Mount Hardware Mounting Systems, www.ez-mount.com, EZ-Mount #SSP-0105 for Salice stamped steel clip-on hinge plate BAV3L09 or BAV3L69; EZ-Mount #SCP-0105 for Salice cast steel clip-on hinge plate BAR3R09 or BAR3R69; EZ-Mount #BSSP-0104 for Blum stamped steel clip-on hinge plate 173H7100 or 173H7130; EZ-Mount #BCCP-0104 for Blum Cast steel clip-on hinge plate 175H7100, 175H7130 or 175H7190; all models $20.
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
