In Projects, Shop Blog, Techniques

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

Q & A: Rub-Joint Gluing

 

Q:

My panel glue ups drive me nuts because the boards
slide around whenever I clamp them together. Then I end
up beating them back into position. What’s going on?

 

A:

Most likely you’re putting too much glue on the joints
and your boards are simply “swimming” around on the
excess glue. Try the rub-joint gluing method instead.

Apply glue to only one edge of the joint, slide the two
boards back and forth until the glue becomes tacky, and
then clamp the boards. Bonus: rubbing the boards
together distributes the glue evenly and produces a strong,
thin glue line.

Click any image to view a larger version.

Before clamping, rub the boards back and
forth for a no-slip glue up.

This story originally appeared in American Woodworker October 2000, issue #82.



October 2000, issue #82


Purchase this back issue.

 


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts

Start typing and press Enter to search