We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.
It’s easy to get carried away with the things we need for woodworking. We don’t have to look far to find someone with a better mousetrap for sale. I did a quick Google search on bench dogs and found a bunch of variations, including some that I own. When I built my bench about a year ago, I meant to make a set of these, but didn’t get around to it until the other day. And I’ve been kicking myself for not doing it sooner.
The dog holes in my bench are 3/4″ in diameter, and the brass dogs I’ve been using can be difficult to remove at times. These wood ones are made from a dowel I turned from scrap to 11/16″ so they drop right in and come right out. When you push against them, however they work well.
After turning, I cut the dowel into pieces about 2-1/2″ long. The other part is about 1/2″ thick, 1-1/2″ wide and about 2″ long. I installed the holes at the drill press and glued in the short lengths of dowel. I let the glue dry overnight, and leveled off the tops with a block plane. I made four in less than an hour, and the raw material came from the scrap bin. One or two make a great planing stop, and I can also use them with either of my vises to hold things between two or four dogs.
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
Bob,
Great post, these have been on my "I’ll get around to it someday" list for a while. Maybe this will help to push them up a little.