In Projects, Shop Blog, Techniques

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

 

I have two options to make the beadboard panels that will fill the inside of the lower cupboard doors : The router outfitted with an appropriate bit or the tablesaw with a molding head cutter.

 

For the first test with the router, this is the router bit that I chose, a 3/8’’ diameter carving bit.

 

 

 

I used a guide clamp well clamped on a scrap piece of hardboard (Aspenite). This is the very interesting result with two passes, meening two setups with the guide clamp.

 

 

 

 

For the second test on the tablesaw I used a molding head cutter. Three cutters must be mounted on the molding head cutter. The tablesaw throat plate insert have been removed for the picture only.

 

 

 

 

This is the very interesting result with only one pass on the tablesaw. This is the technique that I will use for the doors.

 

 

 

 

For more details and photos, visit my website.

 

     Best,

 

          Serge

 

www.atelierdubricoleur.spaces.live.com

 

 


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts

Start typing and press Enter to search