My lathe tool rack is based on a fishing rod rack that I made some time ago. Made from 3/4-in.-thick walnut, it measures 3-1/8-in. by 10-in. by 30- in. I made the matching front and back tool [...]
While I was gluing up the pedestals for an oak desk, I realized I needed a way to hold the sides parallel at the front. Three Quick-Grip clamps and a scrap wood spacer did the trick. They [...]
My flush-trimming setup allows trimming veneer and solid wood edging up to 7/8-in. thick. It consists of a router with a 1/2-in. straight bit, a table and a perpendicular fence. A 1″-thick [...]
After brushing the first coat of finish on my shelf project, quite a bit remained in the disposable cup. I didn’t want to pour it back, because that would contaminate the fresh finish that [...]
HOUSE OF DUST To keep airborne dust from getting into the house, I bought a dust collector for my basement workshop. I wanted to start with a clean slate, so I decided to rid the shop of a [...]
Hoisting heavy sheets of plywood and MDF onto my tablesaw is not my idea of workshop fun. That’s why I devised this pivoting rack— and began storing my sheet stock vertically. The rack’s frame [...]
A router can be one of the most versatile tools in your shop. We've brought together a few of our favorite tips and tricks to help you get the most out of your router.
When I need to cut a bunch of small, equally sized pieces, I install this simple jig. It holds short pieces securely during and after cutting, so they don’t get caught by the blade and thrown [...]
As easy to use as it is to build. Editor’s note: This article originally appeared in the March 2008 issue of American Woodworker. Adjusting for inflation, the correct title would be [...]
I’m sure I’m not the only reader who is astounded by the pristine, seemingly unused shops that frequently appear in this department. Here are a couple of pictures of my shop, showing the [...]