How do you open it? Just push the bottom drawer. If you’ve ever been to a woodworking trade show, you’ve probably seen me demonstrating on the bandsaw. I’ve been doing it for, oh, 35 years now–a [...]
The biggest benefit: less sanding. Big Slice, Big Blade When you’re cutting the back off a big box, your best bet is to use a 1/2″ 4 TPI (Teeth Per Inch) hook-tooth blade, and guide the cut [...]
After hooking up my new dust collector to my contractor’s saw, I found that it just didn’t pull as much air as I’d like, even after sealing up the most obvious leaks. After further inspection, I [...]
Here’s a dirt cheap way to store your saw blades and keep their carbide teeth from knocking into each other. Slip the blades onto a 3/8″ dia. landscape nail, using plastic coffee-can lids [...]
Splayed legs add stability indoors or out. I demonstrate Windsor chair-making at the Common Ground Country Fair in Unity, Maine, an event that celebrates traditional crafts of all kinds. There’s [...]
On a crosscut sled, the fence must be absolutely square to the blade. Here’s a super-accurate method of testing for square. It makes errors easier to detect by magnifying them by a factor of [...]
Here’s a quick way to glue up a mitered frame of any size using only two clamps, with no worry that the frame will shift out of alignment. You’ll need two 1″ x 1″ hardwood bars (make [...]
Tool: Paralign Single Featherboard Shop Now and Paralign Double Featherboard Shop Now Manufacturer: JessEm MSRP: $27.99 & $48.99 At first glance, JessEm’s Paralign Featherboard might look [...]
Bee Gone So, I’m using a wire brush chucked in a drill to clean the rust off of some old metal brackets that I’m planning to use in my new lumber rack. I’ve got a bracket in one hand and …