Archives

Cut perfect circles up to 4′ across! Have you ever tried to cut a circle on a bandsaw, freehand? It’s quick, but it sure isn’t exact. Dollars to doughnuts you’ll get flat spots or bumps [...]

When I rough out work on the band saw, I often find little pieces getting stuck in the throat insert or the split in the table. Also, I find that work can catch in the miter slot. So, I made …

Old bandsaw blades can easily be recycled into useful marking or carving knives. One blade nets you a slew of small pieces. Use a tin snip to cut off a piece of the blade, grind off the teeth, [...]

As a sawyer, I always have a few questions for a client as I prepare to saw their logs into lumber. The first is: “How do you want this cut…live edge or boards?”. My second [...]

I own three bandsaws. Two are hand-me-downs from neighbors and the most recent arrival is a brand new Grizzly 17”  that I bought. The Grizzly is a great machine but like many of its peers, most [...]

After milling the parts for the shelf’s frame, rabbiting them, and cutting the miters, (read the first part of this story here) I connected them to the legs with screws. I found out that [...]

Six years ago my neighbor and friend Dave gifted me his vintage Sears Craftsman 12” band saw. I love this machine and use it quite a lot. Sears used to make these saws and sell them mainly to [...]

Hand-cut appearance with half the fuss. If you’ve labored over hand-cut through dovetails, you’ll be amazed how much faster they can be cut on the bandsaw. You get all the benefits, including [...]

  Harvey Tools recently released a new line of shop tools aimed at the hobbyist under the Ambassador name. We got a chance to put both the 14“ bandsaw and the C200-30 table saw to work [...]

Re-sawing a board is tricky. Most blades drift, so that you must angle the board to get a straight cut. Standard bandsaw fences can’t be angled to compensate for drift, so many folks use a [...]

Pattern-Cut Finials The traditional way to make a square finial on a bandsaw is to mark and cut the pattern on one side of the blank, then tape the offcut back on to the blank in order to guide [...]

A few weeks ago as I was ripping a board on our Grizzly band saw, I felt a kick and heard a bang, the saw blade slipped out of the track, and pieces of black stuff began snowing down …