Archives

Tablesaw Sled Cutoff Block My sliding cutoff sled gets lots of use for repetitive cuts. In the past, I clamped a board to use as a stop, but moving it for different cuts became cumbersome. To [...]

Getting the Point I frequently use awls in my work and like to keep them needle-sharp. This little jig takes only a few minutes to make and guarantees a fine, tapered point. The magnets keep the [...]

Cross-Grain Trim I recently needed to attach molding across the sides of some bookcases. Because the sides were solid wood, I had to allow for some seasonal movement. I used a table-mounted [...]

Repairing Ripped Belts Sanding belts can rip at the worst possible moment – such as when you're out on a jobsite with no spares. When this happens I remove the belt, turn it inside out [...]

Tablesaw Jig Clamp I added this hold-down to my tablesaw’s sliding cutoff jig and find it a great convenience, because the height of the clamp is easily changed. This clamp uses a standard [...]

Glove Finger Chisel Protectors My Chisels used to get dull and rusty rattling around in my toolbox. No more! I found a clever way to protect them. I cut the fingers off some old leather work [...]

Router Base Transfer Points After I lost track of the base plate for the router that goes in my router table, I had to make a new one with accurately marked holes for the mounting screws and a [...]

Vise Crank Handle I'm getting up in years but I still love woodworking. My hands aren't as limber as they used to be, so it was uncomfortable to twist my vise handle. I remembered the [...]

A Brush for Tight Spots Q. I built a little TV stand for our living room that included a 4″ space for the DVD player. It seemed like a great idea until I went to varnish the piece. [...]

Temporary Zero-Clearance Insert My small tablesaw and accessories follow me to jobsites every day. One morning I needed to rip thin slats from a 2 x 4 and wouldn't you know it, I forgot my [...]

Super Chop Saw Stop This stop slides along a rail that's screwed to the top of my chop saw fence, and I can lock it in any position. The hinged block is locked in the down position with a [...]

Groovy Dowels Have you ever tried gluing a pin made from dowel rod in a blind hole? If so you've probably encountered the nasty air pocket that forms at the bottom of the hole and makes [...]