After completing the reconstruction of the main broken molding piece, I glued the molding back onto its panel and began restoring the adjacent corner that was also damaged and required repair. [...]
After completing step (F), I used a gouge to hollow out the cove portion of the molding. I selected a gouge with a sweep that matched the cove radius and carefully shaved the wood in the [...]
Read part 1 After allowing the glue to set, I carefully removed the clamped molding from the guitar maker’s vise. At this point, I removed excess wood from the glued-up block using a bandsaw to [...]
A few months ago, I restored a tall case of drawers in green. While the piece was not old, antique, or of substantial emotional value, it was still quite practical as it was tall and had several [...]