Archives

Difficult glue-ups are troublesome enough without having to position clamp pads as part of the process. I’ve tried using hot-melt glue, double-sided tape and various other methods to hold pads [...]

A well-equipped shop will have a variety of clamps for different situations. Here’s our favorites. I think that you’ve probably heard the saying that “a woodworker can never have too many [...]

Occasionally while woodworking, we all find the need to work on tapered parts. But how do you hold those parts in a vise or with a clamp in order to do the work? I saw a product in a …

Oxalic acid makes black marks disappear. Nasty stains can occur during glue-up if steel clamp beams are left in contact with wood dampened by glue squeeze-out or by scrubbing off the glue. [...]

SUPER GLUED After making a small repair with super glue, I put the tube in my pocket and forgot about it. Later, when I saw the tube’s cap sitting on my workbench, I instinctively reached into my [...]

I lost the rubber pads that came with my clamps. I liked the way the pads protected the wood, so I decided to make my own. After a couple dips in liquid plastic ($9 at a hardware store), my [...]

Self-Storing Glue Kit Gluing up a project can turn ugly in a hurry if you don’t have all your supplies on hand. I put together a kit that contains everything I need: a small white-nylon [...]

Article sponsored by Woodpeckers. Working with plywood is always an adventure. The large size of the sheets isn’t easy to handle in my small shop. This means that I’m often left wrestling these [...]

C-clamps can make nasty dents that are tough to sand out. Pads or block will prevent this, but they’re often awkward to hold in place while you tighten the clamps. I make pads that [...]

The Bessey GearKlamp is designed to reach into places that just weren’t possible with your average bar clamp or f-clamp. Today on the blog, David Lyell gives us his review.

In my ongoing quest for finding adequate substitutions for the vanishing North American clamp manufacturers, I recently discovered an exceptionally strong forged steel C-clamp that will surely [...]

Glue Squeegee I stack-laminate boards to create turning blanks. Each blank contains numerous laminations, so I have to work fast during assembly. To spread glue quickly and evenly, I use a [...]