Not everyone’s ready to tackle hand-cut dovetails. Here’s how to get the most from your router and jig. Dovetails are prime joints. Long history, great appearance and cachet. Used in boxes, [...]
A good substitute for traditional methods, this joint is strong and easy to make. A couple of hundred years ago, most drawers were assembled with hand-cut dovetail joints – half-blinds up front, [...]
Methods that allow wood to move with the seasons. About a decade ago, I made a drop-leaf table for a book of projects. When it came time to mount the top, I just drilled pilot holes and drove cut [...]
There are many ways to cut this popular edge-to-edge joint. by Bill Hylton from the April 2005 issue A tongue-and-groove joint is an edge joint with a mechanical interlock. The edge of one board [...]
Woodworking is not a difficult endeavor. It’s not, really. It is woodworkers that make it difficult. Over-thinking and sweating the small stuff causes us to pause, or even stop. It’s [...]
Anyone who has glued up a few doors knows how frustrating it can be attempting to build assemblies that turn out both flat and square. As I’m working on a cabinet article for the April [...]
To join veneer edges together, they need to be straight and true – just like when gluing up solid lumber. Gaps are not allowed. Granted, veneer edges are not glued in the same way as solid [...]
Recently, when I was cutting up some prototypes for the feet of my workbench on the band saw, I ended up with some interesting offcuts. I liked the shapes, especially when I sandwiched them [...]
This past weekend I was in the magazine shop working on a project for the August issue of Popular Woodworking Magazine. The only hint I can give about the project is that the piece I’m working on [...]
A few small wafers can help strengthen any project you’re working on. By Bill Hylton Pages: 90-92 From the June 2004 issue #141 Buy this issue now Biscuit joinery is so fast and easy it almost [...]
Two matching mortises connected with a strong ‘loose tenon’ will help strengthen any project. By Bill Hylton Pages: 36-40 From the April 2004 issue #140 Buy this issue now I may be a power tool [...]
These joints look great. Cutting and clamping them is the real trick. By Bill Hylton Pages: 38-40 From the February 2004 issue #139 Buy this issue now What joint would you use at the corners of a [...]