Get more from your router and router table with these fantastic accessories. A router may be one of the most versatile tools in the shop. As a hand tool nut, that hurts me a little bit to say, [...]
I made some half-overlay frame-and-panel doors recently, installing the panel a bit proud of the rails and stiles on the front, which recessed the panel on the back side. This isn’t an aesthetic [...]
Replace your router’s base with one that is oversized and stable. The router can be a great friend in the woodshop, but it’s one of those friends with character traits that aren’t welcome in all [...]
As hard as I try to avoid it, every now and then I need to mill a small part on the router table. I’ve learned the hard way that you should never hold that part by hand, for three good …
Gambler’s Micro-Adjust Precise fence adjustments are a sure bet when I clamp this shop-made device on my router table. I simply drilled and tapped a hole to accept a 1/4″-20 machine screw [...]
Dust is a real problem when you can’t use a router table’s fence and its dustport. Here's a clever way to suck up that dust using your shop vacuum's nozzle.
My simple tenoning jig produces flawless tenons in minutes— even haunched tenons. The jig consists of a sled with a glued-on support block and a screwed-on sacrificial backstop. The sled and [...]
Router table cabinets can be a waste of space. This compact, vise-mounted unit stores easily and is just the right size. I think it might have been seeing a $1,000 router table setup at a recent [...]
A coping sled is a must-have accessory for router table work. It helps you hold a narrow piece, such as a door rail, perpendicular to the fence and backs up the cut to prevent blowout. At least, [...]
As easy to use as it is to build. Editor’s note: This article originally appeared in the March 2008 issue of American Woodworker. Adjusting for inflation, the correct title would be [...]
Tool: Professional Router Table Package Buy Now Manufacturer: Infinity MSRP: $1074.40 Tricked Out Router Table Over the years, I’ve been fortunate enough to use a variety of [...]
One afternoon my wife called out to my shop with an urgent request. She needed me to make a round plywood cake plate for a charity auction. I assured her it would be no problem. I was in the [...]