Archives

Make Corner Splines Decorative corner splines sure make an ordinary box look great. But they can be a bit dicey to cut on a tablesaw. Let your plate joiner come to the rescue. A simple jig holds [...]

Classy Face Frames I make a lot of traditional face frame cabinets and it?s always a problem covering the raw edge of the plywood at the corners. A normal face frame is very obtrusive when viewed [...]

Extract a Broken Screw Murphy’s Law guarantees that screws will break at the worst times. Fortunately, I’ve found a simple way to extract the headless shank and repair the damage. I [...]

Joint Rough Lumber with a Planer I came across some wonderful oak boards for a small table I wanted to build. The problem was the boards were too wide for my jointer and I didn't want to rip [...]

Q & A: Board Feet Calculation   Q: I used to buy planed and jointed lumber (S4S) at a home center where it was sold by the lineal foot.Now that I have a planer and jointer, I want to buy [...]

At-Hand Tool Storage By Bob Ungar I hate fumbling around in drawers or digging into cabinets for tools.That’s why I love perf-board. It displays my hand tools out in the open [...]

Q & A: Truing a Framing Square   Q: I just inherited my grandpa’s framing square. It’s big and heavy and I’d like to use it but it isn’t square! How on earth can [...]

Q & A: Final Rubout   Q: I always have problems getting a smooth finish. I sand the wood with 220 paper,wipe it with a tack cloth, apply three coats of high-quality varnish, and still [...]

Q & A: Jointing Thick Wood with a Router Q: I have a very small shop and don’t have the space for large machines like jointers and planers. I need to make thick table legs from three 3/4-in. [...]

Q & A: Pencil Mark Cleanup Q: How do I get the pencil marks off my oak plywood bookcase? I tried using an eraser, but that didn’t get down into the open grain.When I tried sanding it out I [...]

Q & A: Veneered-Plywood Tear-Out Q: I have some planks with a pronounced crook.The grain is beautiful and I would like to make use of the crook in a desktop design. How can I edge join the [...]

  Q & A: Keep the Crook Q: I have some planks with a pronounced crook.The grain is beautiful and I would like to make use of the crook in a desktop design. How can I edge join the boards [...]