Archives

After years of fumbling with clamps, I decided there must be a better way to attach featherboards to my tablesaw's rip fence. Two T-tracks screwed to the fence allow me to mount a piece of [...]

Clamping featherboards to my tablesaw was always a hassle until I discovered locking welding clamps. Their C-shaped jaws adjust to fit the webbed castings on the bottom of the extension table. [...]

Installing a dado set on my left-tilt saw makes the scale on the rip fence un-usable. Here's why: The cutters stack from left to right, toward the fence, so each cutter I add knocks the scale [...]

Ribbed Saw Table Fillers I like my contractor’s saw just fine, except for the ribbed extension tables. The openings can be a real finger pincher when sliding the rip fence across them. [...]

Large Sheet Crosscutting Crosscutting large sheets of plywood on the tablesaw can be difficult, and I usually end up binding the blade, burning the wood, or worse. To get around this, I clamp a [...]