Archives

Tool: CTS Compact Table Saw Shop Now   Manufacturer: SawStop MSRP: $899 Most woodworkers are familiar now with the SawStop line of table saws and their patented safety system that stops the [...]

Tool: Grr-Ripper 2 Go Shop Now   Manufacturer: MicroJig MSRP: $29 MicroJig, the company behind the much acclaimed, Grr-Ripper push block, recently released a new, trimmed-down version of the [...]

Crosscut sleds have been around for a long time, but few are ideal. Many are heavy and hard to store. Most develop an extra-wide saw cut in the fence and allow the blade to throw sawdust in your [...]

For small cabinets, I prefer to use small, discreet shelf pins that I make myself. I also make sleeves for the pins to fit into. Sleeves help hold the pins firmly in place. I make the pins from [...]

It’s just like sawing a cove molding, but now the wood is round. “You’re kidding me!” That’s everybody’s first reaction when I tell them that I’ve figured out a way to make a bowl on the table [...]

The limited crosscut capacity of my cabinet saw made it a challenge to cut wider boards, so I designed an infeed table that hangs on a wall when not in use and quickly and securely attaches to [...]

Tool: Whiteside Plus by Dimar Industrial Saw Blades Shop Now   Manufacturer: Whiteside MSRP: $76+ I had the opportunity to spin the newest blades from Whiteside Plus by Dimar. I thoroughly [...]

Flying Sawdust Last summer, due to the heat, I covered my portable saw with a canvas tarp and retreated to the cooler air inside my basement shop.  For two months, the saw sat under the shed [...]

Even with a zero-clearance throat plate in my tablesaw, a thin cut-off slips through now and then. These pieces can clog a vacuum hose or damage the blades of a dust collector.  I made a trap to [...]

Resawing can be a wild ride. You never know exactly what’s going to happen when you cut open a board! Just getting your tablesaw or bandsaw to work right can be an adventure, too. Resawing [...]

Hoisting heavy sheets of plywood and MDF onto my tablesaw is not my idea of workshop fun. That’s why I devised this pivoting rack— and began storing my sheet stock vertically. The rack’s frame [...]

I designed an outfeed support for my table saw that doesn’t take up any floor space. It’s made of plywood, hardwood and a store-bought roller. Three main design features enable it to work well. [...]