Setting up the New Stanley Chisels
I finally found the time (it was between the couch cushions) to set up the new Stanley socket chisels. I’m working on the backs today, and here’s the news so far. Of the eight chisels, I’d rate [...]
Tool Test: Lap-Sharp Sharpening System – Quality at a Price
By Robert W. Lang Page: 84 From the December 2005 issue #152 Buy this issue now Getting the hang of sharpening is not an easy task for the amateur woodworker. The Lap-Sharp addresses this by [...]
Tool Test: Milwaukee’s V28 System – Nearly Corded
By David Thiel Page: 84 From the December 2005 issue #152 Buy this issue now Who needs 28 volts of power? Me – especially if it’s sized like an 18 volt and will let me use a cordless circular saw [...]
Tool Test: DeWalt’s New 5″ Random-orbit Sander
By David Thiel Page: 36 From the November 2005 issue #151 Buy this issue now Random-orbit sanders have made my woodworking career a much happier thing. And each year there are improvements to the [...]
Tool Test: Dovetail Square Adds Accuracy to Marking Joints
By Christopher Schwarz Page: 36 From the November 2005 issue #151 Buy this issue now Hand-cut dovetails can be tricky at first, so anything you can do to eliminate marking errors will improve [...]
Tool Test: KIK Forstner Bits
By David Thiel Page: 35 From the November 2005 issue #151 Buy this issue now Woodworkers need a good set of Forstner bits. Designed to cut clean, flat-bottomed holes, they’re very handy to have [...]
Tool Test: Amana Carbide Countersinks
By David Thiel Page: 35 From the November 2005 issue #151 Buy this issue now While using screws on a woodworking project may not be fine woodworking, it happens all the time. To improve the look [...]
Tool Test: JDS Dust Gate Switches Dust Collector
By Steve Shanesy Page: 34 From the November 2005 issue #151 Buy this issue now Even in a small shop, traipsing back and forth to the dust collector to turn it on and off can be a nuisance. [...]
Tool Test: Traditional English Mortising Chisels from Ray Iles
By Christopher Schwarz Page 34 From the November 2005 issue #151 Buy this issue now Most modern mortising chisels these days are poorly ground, misshapen and uncomfortable to use. It’s no small [...]
Tool Test: JessEm Miter Gauge – Worth the Money
By Robert W. Lang Page: 34 From the October 2005 issue #150 Buy this issue now A high price tag brings high expectations and the JessEm Mite-R-Excel lives up to its price. Thoughtfully [...]
Tool Test: Veritas Scrub Plane Can Blaze Through a Board
By Christopher Schwarz Page: 33 From the October 2005 issue #150 Buy this issue now Though I own a powered jointer and planer, I always keep a scrub plane close by. It’s good for dressing boards [...]
Tool Test: Shop Fox W1724 15″ Planer with Spiral Cutterhead
By David Thiel Page: 33 From the October 2005 issue #150 Buy this issue now In our February 2005 issue we tested 15″ planers and, honestly, we missed one. The Shop Fox W1724 should have [...]