Archives

Whether shaped as a vase, a column or even an egg, there’s plenty of room for expression in a turned lamp. The flowing contours of the lamp shown here do more than make it an attractive [...]

Squeeze-out happens! You can’t stop it, so you just have to try to contain it. One day while shopping the local home center, I found a product called DRIcore Subfloor.  It’s used as a [...]

Applying contact cement with a roller is my preferred method, as opposed to spraying it on. There’s not as much clean-up, and I don’t have to deal with overspray. There are drawbacks [...]

Initially lining up the edges of two boards for gluing up a jig is pretty easy. But when you add clamps or screws, one board often shifts out of place. If that alignment is critical, I [...]

Glue-ups are always a stressful moment – you have a short timeframe to correctly align the parts you’ve been working on for some time, and failure to do so can compromise your results. So, I [...]

Editor’s note: this product no longer appears to be available. Cyanoacrylite (CA) glues have been around for years, but the folks at Bioformix have come out with a new twist, making a [...]

In the third part of this workbench build I get around to gluing up the leg frames. I thought I’d take a moment to mention a couple of details about this phase of the project. Throughout [...]

Miter joints can be a real source of frustration. The pieces need to be the exact length and the cut surfaces need to be as close to perfect as you can get them. If they don’t look great [...]

From time to time I hear someone comment about a woodworking practice that runs totally contrary to what I’ve been taught. One of these is what kind of wood surface yields the strongest [...]