Archives

I recently built a chest of drawers with sliding-dovetail joinery. During assembly, I found that the fit was just a little too snug. Rather than trying to realign my router jig, I looked around [...]

Achieving exact thickness is really important when making splines to reinforce box corners. The splines have to fit perfectly in the saw kerfs—a few thousandths of an inch one way or the other [...]

  Tips for taming those awkward and heavy sheets. Woodworking alone is peaceful, serene and quiet. Just you, the radio and your project. It’s also a pain in the posterior when you have to [...]

Tighter Corner Joints Ahead Dadoes and, rabbets are two of the most widely used cabinetmaking joints. Cabinet carcasses, drawer boxes and jewelry boxes all lend themselves to this simple but [...]

Woodworkers are both cursed and blessed with our hopelessly archaic system of measuring. When it comes time to divide any distance in half, like marking the center of a board’s edge for resawing, [...]

Maximize your drum sander’s potential. 1. Skip the Scrape Eliminate laborious hand scraping of dried glue: contrary to popular belief, you can take glue-ups directly to your drum sander. [...]

Whenever I have to cut down a sheet of plywood, I reach for one of my trusty metal stud straightedges. Metal studs are available in different thicknesses for different applications. For example, [...]

Dust is a real problem when you can’t use a router table’s fence and its dustport. Here's a clever way to suck up that dust using your shop vacuum's nozzle.

Countersink first, drill the pilot hole second. That may sound backward, but it’s the easiest way to ensure a perfect countersink.

Drawer Helper Desperation is the mother of invention—isn’t that how the old saying should go for woodworkers? I invented this device when I realized that the drawers in my new armoire tipped down [...]

When I crosscut hardwood plywood, I use an old technique to minimize tearout on the bottom face. I simply make two passes with my general-purpose blade. After setting the rip fence, I cut a [...]

Chris Schwarz shares some handy, nearly-forgotten handsaw tricks to use in the shop.