In Shop Blog, Tools

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

plane_key

During the last few months I’ve been revising “Handplane Essentials,” an out-of print book that we published while I was the editor at Popular Woodworking Magazine.

The revisions, additions and subtractions will be significant. We’re removing a lot of the reviews and features on planemakers who are no longer in business. And I hope we’ll replace them with articles on those who are.

On the technique side of things, I’m writing two long chapters that cover beading planes, complex moulders and hollows and rounds. At the time of writing the first book, I didn’t feel confident enough to tackle these topics with any authority. After teaching these methods to lots of woodworkers during the last seven years, I’m now ready to put down my thoughts on this topic (with big thanks to Matt Bickford of M.S. Bickford planes for laying some incredible groundwork).

No2_breaker_setup_open_IMG_0909

The other big change to the book is incorporating chipbreakers into the section on setting up a handplane. When I wrote the book, I (like many woodworkers) was skeptical about how well they work. About six years ago David Charlesworth encouraged me to replicate some experiments by a Japanese professor. That experiment changed my mind completely.

Chipbreakers aren’t the only solution to taming tear-out. They’re one solution. And I’ve merely folded that idea into the book as a whole.

Other snips and additions: I’ve added some tricks that I’ve learned for sharpening router plane blades. And I’m adding an article that delves deeper into block planes. I’ve removed some discussions of tools that I don’t use anymore (my tool kit has shrunk significantly since first writing the book, but at that time I was reviewing hand tools for the magazine and was expected to have a broader view).

I’ll be turning in my revisions in a couple weeks, and then Scott Francis and the designers get to do their job to make it all fit together. I’m not sure when it will be released, but I’m told it will be a hardback and printed in the United States, just like the first edition.

— Christopher Schwarz


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recent Posts
Showing 5 comments
  • kssandefur

    I think this will be a very good book for reference. Cant wait to get my hands on a copy. Good luck on a Speedy Re-Edit!

  • David Charlesworth

    Chris,

    That will make a very useful volume.

    Best wishes,
    David

  • Shaun Harper

    Great news!
    Your article on block planes should be a good read. For a long time I have looked at this tool as a one handed plane. So many videos just show the plane set up for a very fine shaving often used along an edge. But when using it to put a wide bevel on a board or flatten an area, using my second hand just like any other plane makes the job so much easier.

  • Scott Francis

    We’re looking at a February 2017 release (super excited about this one).

  • timcgrew

    Awesome. Can’t wait for the new addition.

Start typing and press Enter to search

Working Wood by Simon James