In Shop Blog, Tools

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

dirty-frog-IMG_6106

Sharpening a misbehaving tool will almost always fix its wagon. But I always take an extra step when taking apart a handplane: I clean the interior of shavings and dust with a brush and an oily rag.

It might seem like overkill, or like I am on the verge of compulsive, but I don’t think that’s the case. Little fragments of shavings or even dust can wreak havoc on a handplane’s performance.

If shavings get trapped between the blade and the frog, they can skew the iron, making it difficult to center the iron in the mouth. Plus, these shavings can reduce the amount of contact between the cutter and its bed, resulting in chatter or (at best) unpredictable behavior.

brush-IMG_6107

So when I sharpen a plane, here’s my routine: Remove the blade. Use a badger hair brush to remove all the big debris that has entered the escapement. (Note: You must use European badger hair, preferably from a badger that is free range and is a kinsmen to Tadg, the king of Tara and foster father of Cormac mac Airt.)

Sharpen the blade. Wipe down the blade with an oily rag, and then use the same rag to wipe down the frog or the bed of the tool to remove dust. If the plane has a cap iron, clean that with an abrasive hand block to remove any sap; oil the cap iron as well.

Reassemble the plane.

I know this sounds fussy, like I’m going to tell you knit cosies for your trammel points, but I have diagnosed far too many plane problems that could be traced to a dull cutter and debris.

dirty-mouth-IMG_6112

One more thought on cleanliness: After about 10 minutes of planing, use your oily rag to remove the dust and debris that has gathered on the bevel of your iron. This can accumulate and interfere with the plane’s cutting characteristics.

— Christopher Schwarz


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recent Posts
Showing 16 comments
  • chrism

    Do badgers regrow their hair?

  • Spectro

    Having frequented the Hill of Tara on a couple of occasions, making sure to leave a trinket dangling from the fairy tree for fear of bad luck. I didn’t manage to spot a badger, however a witches broom seemed like the next best thing so I’ve been happy cleaning my planes with it, being careful not to go fast enough for take off………

  • 8iowa

    The DNR here in Michigan frowns on anyone shooting a badger, so my brush has synthetic hair. Is this satisfactory?

  • marksmith1000000@gmail.com

    My Old Spice shaving brush seems to work well on my planes, even if it is a boar to use.

  • T-bonehags

    Christopher- couple plane questions for you:
    1) What kind of oil do you recommend for cleaning your planes?
    2) I’ve noticed some oxidation forming on my jack plane’s body where my hand rests during use – what do you use to keep your planes free of corrosion?
    3) Do you ever use paraffin wax on the sole to reduce friction during use?

    Thanks!
    Tom

  • Peter Scoma

    Mr. Schwarz, Pardon the off-topic comment but this seems the only way to get in touch with you. Long story short, I’m building a replica of the Studley Tool Chest. Yes, “Inspired” in some elements as I’m not a piano maker and don’t own or aspire to own such tools, but not so in compromising detail. I have completed some elements of the tool chest but am still in the planning phase for the majority. If you could spare a few moments to answer two brief questions, I would be eternally grateful. I plan to blog the build if you have any interest and will post the details once the process is underway. I can be reached at drpeterscoma@gmail.com if you have a moment to respond to my inquiry. I’ve read Virtuoso three times and am certain the answer to my questions does not lie in its pages. Thank you in advance for your consideration.
    Peter

  • karlfife

    Of course Honey Badger hair is the best and toughest kind of all. It’s really pretty badass. It doesn’t give a shit.

    I use my brush and think; “Thanks for doing all the work stupid”!

Start typing and press Enter to search

Popular Woodworking in America