We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.
When I had to install a bunch of magnetic catches recently, I came up with this simple method to mark the doors for the strike plate. It requires no measuring and the results are neat and clean.
Just insert the mounting screw in the plate and attach it to the magnet. Then press the door firmly against the screw so the tip leaves a mark. Drill a hole centered on this mark and then fasten the plate.—Tim Howell
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
