We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.
The blade of a marking gauge must be as sharp as a scalpel in order to cut a fine line across the grain. Sharpening it can be very difficult because it’s so small. I solved that problem by making a gauge that accepts snap-off utility knife blades.
I use epoxy to glue the blade into a kerf sawed into the gauge’s beam, which is just a dowel. When the blade gets dull, I cut off the end of the dowel, blade included, snap off a new blade and glue it into a new kerf. -Alejandro Balbis
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
