We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.
We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.
Trimming miters used to drive me crazy, because I couldn’t hold the piece I was trimming securely enough against the miter gauge. The piece would always slide away from the blade during the cut. I solved the problem by covering the miter gauge face with a 120-grit PSA (pressure sensitive adhesive back) sandpaper. One 5″ disc will cover most gauges. I clean the face with denatured alcohol, to assure good adhesion. Then I simply cut the disc to fit the face and press on the pieces.—Rich Petrushka
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
