We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.
My tablesaw’s top often does double duty as an assembly table. It’s a guaranteed-flat surface. When I glue or screw together a project, it won’t come out twisted.
Sometimes I use the saw’s fence as a clamp to hold parts in place for fastening. The “fixed” end of the clamp is a stick that fits tight in the saw’s miter slot.
If I’m gluing, I’ll cover the saw with newspaper or red builder’s paper. Before I used paper, I found that I could pop off dried glue blobs from the cast-iron top using a putty knife, but the glue discolored the surface. –Alan Wesley
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
